Toyo Greenland Co.,Ltd



	Bonded Fibre Matrix

Apart from the traditional mulch usual paper cellulous using in the Hydroseeding work, Bonded Fibre Matrix (BFM) is a 100% biodegradable product consisting of wood fibres interlocked and bonded together by organic or mineral bonding agents. It is suitable to be applied to colluvium soil, alluvium soil, highly decomposed soil and sandy soil which do not have adequate layer of topsoil or organic matter for the vegetation growth.







	Bonded Fibre Matrix
	Bonded Fibre Matrix

After the application BFM to the soil surfaces, it forms a viscous layer, i.e. 1 to 2 mm,that creates a high strength, porous, erosion-resistant and uniform cohesive protective layer to the in-situ soil surface.Beside, it provides the optimum micro-climate for the germination and growth of grass/tree/wild flower seed, creeper plant sprig and fern spore until the healthy establishment of plant.







	Application
	Application

In the case of the surface protection between using the Bond Fiber Matrix and the Erosion Control Mat, the application of Bond Fiber Matrix should be followed by the installation of erosion control mat.

The Major Different of Bond Fiber Matrix Vs Erosion Control Mat

Bond Fiber Matrix		Erosion Control Mat
Applied via hydraulic seeder		ECMs are manually rolled and stapled in place
100% Biodegradable		Can be Biodegradable/ Non-degradable
100% complete coverage to the ground surface		Improper placement or lack of fine grading can result in “tenting and possible erosion of soil beneath the ECB.
One-step application to save the installation of hydroseeding		Hydroseeding has to be conducted before or after the installation of ECMs.

Advantages


	--→	Easy Installation by Hydroseeding
	--→	One – Step Application for 100% Coverage
	--→	Enhanced Germination
	--→	High Moisture Retaining Capacity
	--→	Reduced Soil Erosion and Water Runoff
	--→	Fully Biodegradable
	--→	Minimize Raindrop Impact

The main differences between Bonded Fire Matrix and Erosion Control Mat (ECM) are the means by which they cover the earth area and the method of application.For ECM, area must be sealed first and then the ECMs are manually rolled and stapled in place.And for BFM, it can be applied via hydraulic seeder/ mulcher.


Hong Kong Office				United State Office

No.58 South Section, Wah Shan Village
SheungShui, N.T., HongKong
Tel: 852-2639 9312 Fax: 852-2377 2150

2437 Shattuck Avenue, Suite 18
Berkeley, CA 94704, USA
Tel: 1510-841 3037 Fax: 1510-841 7113

China Office (JiangMen Branch)

China Office (Zhongshan Branch)

Room 201, Block 11, YiJu Court, YuDeng, PengJiang District , JiangMen,GuangDong
Tel: (86)750-3908 716 Fax: (86)750-3909 844

ShuFangBei, NanQiao Country
WuGuiShan, ZhongShan, Guangdong
Tel: (86)760-820 9802 Fax: (86)760-820 9803